EasyManua.ls Logo

MasterCraft 055-0216-8

MasterCraft 055-0216-8
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
headline bars
model no. 055-0216-8 | contact us 1 800 689-9928
20
Place the generator on a flat, level
surface.
Remove oil fill cap/dipstick to add oil.
Using a funnel, add up to
37 1/5 fl. oz (1100 ml) of oil (included)
and replace oil fill cap/dipstick. DO NOT
OVERFILL.
Cut cable tie on each side of battery
connector.
Push two halves of battery connector
together tightly.
ADD ENGINE OIL
MAX
OIL DIPSTICK
MAX
OIL DIPSTICK
MAX
CAUTION!
DO NOT attempt to crank or start the engine before it has been properly filled with the
recommended type and amount of oil. Damage to the generator as a result of failing to follow
these instructions will void your warranty.
FPO
1
1
2
3
4
2
CONNECT THE BATTERY
Check engine oil level at every use
and add as needed.
A visual check should show oil about
1-2 threads from running out of the
fill hole. When using the dipstick to
check oil level, DO NOT screw in the
dipstick while checking.
ASSEMBLY

Related product manuals