EasyManuals Logo

MasterCraft 055-0216-8 User Manual

MasterCraft 055-0216-8
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
headline barsheadline bars
model no. 055-0216-8 | contact us 1 800 689-9928
40
STORAGE
LONG-TERM STORAGE (OVER 1 YEAR)
For storage over 1 year, the gasoline tank and carburetor must be completely drained of gasoline.
REMOVING FROM STORAGE
If the generator has been improperly stored for a long period of time with gasoline in the
gasoline tank and/or carburetor, all fuel must be drained and the carburetor must be thoroughly
cleaned. This process involves technically advanced tasks. For assistance please call our
Technical Support Team at 1-800-689-9928.
If the gasoline tank and carburetor were properly emptied of all gasoline prior to the generator
being stored, follow the steps below when removing from storage.
The generator is to be OFF and all appliances disconnected.
Turn the fuel valve to the ON position.
Use the drain bolt on the carburetor to empty any excess gasoline from the gasoline tank and
carburetor into an appropriate container. Use a funnel (and appropriate hose if necessary)
under the carburetor drain bolt to avoid spillage.
When gasoline stops flowing from the carburetor, replace and tighten the carburetor drain
bolt and be sure to properly dispose of the drained gasoline according to local regulations or
guidelines.
Turn the fuel valve to the “OFF” position.
Follow steps 8–11 according to “Mid-Term Storage” (page 38).
Be sure the engine/ignition switch is in the “OFF” position.
Add gasoline to the generator according to “Add Fuel” (page 22).
Turn the fuel valve to the “ON” position.
After 5 minutes check the carburetor and air filter areas for any leaking gasoline. If any
leaks are found, the carburetor will need to be disassembled and cleaned or replaced. If no
gasoline leaks are found, turn the fuel valve to the “OFF” position.
Check engine oil level and add clean, fresh oil if needed. See “Oil Specifications” (page 42)
for proper oil type.
Check and clear air filter of any obstructions such as bugs or cobwebs. If necessary, clean
air filter according to “Cleaning the Air Filter” (page 35).
Start the generator according to “Starting the Engine” (page 25).
1
1
2
2
3
3
4
4
5
5
6
6
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 055-0216-8 and is the answer not in the manual?

MasterCraft 055-0216-8 Specifications

General IconGeneral
BrandMasterCraft
Model055-0216-8
CategoryPortable Generator
LanguageEnglish

Related product manuals