SAFETY GUIDELINES
6
AIR-POWERED GRAVITY-FEED SPRAY GUN 058-9312-8
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not allow unskilled or untrained individuals to operate the Gravity-feed
Spray Gun.
• U
se components recommended by manufacturers: Never modify the tool for
other applications. Use only parts, nozzles, and accessories with
specifications as mentioned in this manual
(see section “Technical
specifications”)
.
• I
nspect the tool components and attachments before operation and ensure
that they are assembled properly and are not damaged. Failure to comply
could lead to serious injury or loss of life.
• L
ocate the compressor in a well-ventilated area for cooling, at a minimum of
12" (31 cm) away from the nearest wall.
• P
rotect the air hose and the power cord from damage and puncture. Inspect
t
hem for weak or worn spots every week, and replace them if necessary.
• A
lways wear hearing protection when using the air compressor. Failure to do
so may result in hearing loss.
• D
o not carry the compressor while it is running.
• D
o not operate the compressor if it is not in a stable position.
• D
o not operate the compressor on a rooftop or in elevated position that
could allow the unit to fall or be tipped over.
• A
lways replace a damaged gauge before operating the unit again.
• Use compressed air at regulated pressure: Always use
clean, dry, and compressed air at the regulated pressure.
Do not exceed the maximum operating pressure of 80
PSI. Failure to comply could lead to serious injury or loss
of life.
MC-OM-06
To Next Page
Loading...