Need help?Do you have a question about the MasterCraft 058-9336-2 and is the answer not in the manual?
General| Maximum Pressure | 3000 psi |
|---|---|
| Power Source | Electric |
| Type | Airless |
| Spray Tip Size | 0.015 inches |
| Hose Length | 25 feet |
Precautions for the personal safety of the user and others.
Guidelines for selecting and using the correct air compressor with tools.
Overview of the spray gun's features, design, and operational capabilities.
Essential checks and safety precautions to perform before operating the spray gun.
Step-by-step guide for filling the spray gun's canister with paint.
How to adjust pattern, paint output, and atomization for optimal performance.
Instructions on adjusting the spray pattern to circular or elliptic shapes.
Guide on how to adjust the paint output volume.
Proper techniques for holding, moving, and operating the spray gun.
Routine checks of trigger, spring, and safety mechanism for free movement.
Periodic detailed examination for worn or broken parts.
Procedure for replacing components that are worn or damaged.
Instructions on how and when to lubricate the spray gun.
Proper procedures for storing the spray gun after use.
Resolving issues causing the spray to flutter or spit.
Troubleshooting problems resulting in an arc-shaped spray pattern.
Fixing non-uniform spray patterns for consistent coating.
Addressing issues where the spray pattern center is too narrow.
Resolving spray patterns that are too narrow.
Troubleshooting air leaks from the air cap when the trigger is inactive.
Resolving fluid leaks originating from the packing nut.
Solutions for problems that cause excessive overspray.
Troubleshooting steps for when the spray gun produces no spray.
Details on the limited warranty coverage for Mastercraft products and accessories.
Further restrictions and conditions applicable to the product warranty.
Information regarding consumer rights and warranty provisions.
To Next Page
