OPERATING INSTRUCTIONS
11
AIR-POWERED SIPHON-FEED SPRAY GUN 058-9336-2
Before using the spray gun
• After unpacking the spray gun, inspect
carefully and check thoroughly to see if
there is any damage that may have
occurred during transit. Ensure the
tightness of fittings, bolts, etc., before
performing any operation.
• After connecting the gun to air supply,
ensure the tight connection of the fluid
cap, canister, and air hose with the Air-
powered Siphon-feed Spray Gun.
• Use a piece of cardboard or other scrap
material as target for trial spray and
adjust for best spray pattern.
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not exceed the maximum pressure of spray gun or any other parts in the
compressor system. Failure to comply could lead to serious injury or loss of life.
• Never aim or spray at yourself or anybody else which could cause serious
injury. Failure to comply could lead to serious injury or loss of life.
To Next Page
Loading...