MasterCraft 058-9336-2 User Manual

MAINTENANCE
18
AIR-POWERED SIPHON-FEED SPRAY GUN 058-9336-2
• Pour out the remaining paint into another container.
• Disassemble the Air-powered Siphon-feed Spray Gun.
• Clean all paint passages, nozzle, and other components using a brush dipped in cleaning
solvent.
• Reassemble the spray gun and spray small quantity of solvent in the paint passages to
remove any paint residue.
Storage
• Rotate the paint adjustment knob in counter-clockwise direction and open the knob when the
gun is not in use. This will reduce spring tension on the needle fluid tip.
• Clean the Air-powered Siphon-feed Spray Gun thoroughly and slightly lubricate it, after using
and before storing.
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not use metal or other objects that could damage the holes in nozzle and
cap.
• Never immerse the spray gun completely in solvent.
• Do not use components or parts that are not recommended. Failure to comply
could lead to serious injury or loss of life.

MasterCraft 058-9336-2 Specifications

General

Brand	MasterCraft
Model	058-9336-2
Category	Paint Sprayer
Language	English