IMPORTANT INFORMATION
13
AIR-POWERED FULL-SIZE DIE GRINDER 058-9332-0
Read this instruction manual thoroughly or have tool operators read thoroughly before using the tool.
• Read all safety guidelines
(see section “Safety guidelines”)
at the beginning of this manual.
• Always inspect the air tool prior to each use to
– ensure proper use of power source.
– determine whether the tool is in proper working order.
• Only use accessories which are specifically designed for use with this tool
(see section
“Technical specifications”)
.
• Drain the compressor tank daily. Water in the air supply line will damage the tool.
• Clean the air inlet and the filter weekly.
• Line pressure should be increased to compensate for unusually long air hoses. The hose
diameter should be 3/8”.
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not use the tool if it is not in proper working order.
• Do not use oxygen or any other combustible or bottled gas to power this tool.
• Do not use this tool in the presence of any flammable liquids or gases.
• Keep hose away from heat, oil, and sharp edges. Check hose for wear and
tear, and ensure that all connections are secure. Failure to comply could lead
to serious injury or loss of life.
• Keep hands and other parts of the body away from the work areas when
connecting the air supply. Failure to comply could lead to serious injury or
loss of life.
To Next Page
Loading...