MasterCraft 058-9325-8 User Manual

IMPORTANT INFORMATION
11
AIR-POWERED DUAL-ACTION SANDER 058-9325-8
General usage description
The Mastercraft
®
Air-powered Dual-action Sander features a housing made of durable, lightweight
aluminum. The tool is designed with comfortable and ergonomic grips. An air regulator is attached
for speed control, and a
dust-proof mat is attached for filtering the debris away from the tool. The tool
is useful for sanding wood, metal, fiberglass, and auto body filler. This sander provides a quiet
sanding action for a smooth pattern-free finish.
Compatible compressor and air tool
GUIDELINES FOR PROPER USAGE AND OPERATION
Always ensure the use of appropriately matched air tools and compressors. The compressor should
be able to supply a minimal air delivery of 2.8 SCFM @ 90 PSI to ensure the compressor can run
continuously with the Mastercraft Air-powered Dual-action Sander. Using tools or a combination of
tools that together or separately require more than the air compressor can deliver will reduce
performance and could void the compressor or tool guarantee/warranty.
Air system
• Always use clean, dry, regulated, compressed air at 4 to 7 bar (60 to 100 PSI).
• Do not exceed the maximum and minimum pressures. Operating the tool at the wrong
pressure (too low or too high) will cause excessive noise or rapid wear.
Air Compressor
Size & Power
2 HP 2 1/2 HP 3+ HP
6 Gallons
Light duty and
intermittent use
Light duty and
intermittent use
Medium duty and
intermittent use
8–11 Gallons
Light duty and
intermittent use
Medium duty and
intermittent use
Heavy duty and
continuous use
15+ Gallons
Medium duty and
intermittent use
Heavy duty and
continuous use
Heavy duty and
continuous use

MasterCraft 058-9325-8 Specifications

General

Brand	MasterCraft
Model	058-9325-8
Category	Sander
Language	English