MasterCraft 058-9325-8 User Manual

SAFETY GUIDELINES
6
AIR-POWERED DUAL-ACTION SANDER 058-9325-8
• Risk of burns: The pump and the manifold generate high temperatures. In
order to avoid burns or other injuries, do not touch the pump, the manifold,
or the transfer tube while the compressor is running. Allow the parts to cool
down before handling or servicing. Keep children away from the compressor
at all times.
• Do not use oxygen or any other combustible or bottled
g
as to power air-powered tools. Failure to observe this
warning can cause explosion and serious personal injury
or death. Use only the compressed air to power the air-
powered tools.
Use a minimum of 25' (7.6 m) of hose to
connect the tool to the compressor. Failure to comply will
result in serious injury or loss of life.
• Risk of bursting: Make sure the regulator is adjusted so
that the compressor outlet pressure is set lower than the
maximum operating pressure of the tool. Before starting
the compressor, pull the ring on the safety valve to make
sure the valve moves freely. Drain water from tank after
each use. Do not weld or repair tank. Relieve all pressure
in the hose before removing or attaching accessories.
Oxygen
Hydrogen
Explosive
Combustible
MC-OM-02
MC-OM-22

MasterCraft 058-9325-8 Specifications

General

Brand	MasterCraft
Model	058-9325-8
Category	Sander
Language	English