NOTE: The word “Note” is used to inform the reader of
something he/she needs to know about the tool.
SQUARE DRIVE
SPEED (NO LOAD)
MAXIMUM TORQUE
CF REQUIREMENT
WORKING PRESSURE
AIR INLET
AIR HOSE REQUIRED
WEIGHT
1/2" (12.7 mm)
7500 RPM
450 ft-lb
3.7 CFM @ 90 PSI
90 PSI
1/4"-18 NPT
3/8" (9.5 mm)
4 lb 6 oz (2.1 kg)
CFM: Cubic Feet per Minute (the volumetric flow rate of air corrected to
standardized conditions of temperature and pressure).
NPT: National Pipe Thread.
TECHNICAL SPECIFICATIONS
54
model no. 058-9803-0 | contact us 1-800-689-9928
These precautions are intended for the personal safety of the user and others working with the
user. Please take time to read and understand them.
Make sure you read and understand this manual before using this tool. Make sure other users
read and understand this manual before they use the tool.
SAFETY GUIDELINES
PERSONAL SAFETY
Potential hazard that will result in serious
injury or death.
Potential hazard that could result in
serious injury or death.
Potential hazard that may result in
injury or damage to equipment.
WARNING!
CAUTION!
DANGER!
This manual contains information that relates to PROTECTING PERSONAL SAFETY and
PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and
understand it thoroughly before using the product. The symbols listed below are used to
indicate this information.
To Next Page
Loading...
Need help?
General
