Need help?Do you have a question about the MasterCraft 054-1216-4 and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Chuck Type | 1/4" Hex |
| Battery Type | Lithium-Ion |
| Impacts Per Minute | 0-3, 200 IPM |
| No Load Speed | 0-2, 800 RPM |
Mandates wearing approved safety goggles and hearing protection during operation.
Detailed safety rules for impact wrench operation, including accessory use.
Instructions for installing impact sockets and the hex drive adapter.
How to use the forward/reverse button and variable speed trigger.
Step-by-step guide for using the impact wrench to remove fasteners.
To Next Page
