Rating 120 V, 60 Hz, AC
Amperes 3.5 AMP
Impact speed 0–3,200 BPM
Torque 220 ft/lbs
Square drive 1/2”
Weight 4 lb 7 oz
(2.0 kg)
TECHNICAL SPECIFICATIONS
4
General safety warnings
WARNING: Before using this tool or any of its accessories, read this manual and
follow all Safety Rules and Operating Instructions. The important precautions, safeguards and
instructions appearing in this manual are not meant to cover all possible situations. It must be
understood that common sense and caution are factors which cannot be built into the product.
This instruction manual includes the following:
• General Safety Rules • Operation
• Specic Safety Rules and Symbols • Maintenance
• Functional Description • Accessories
• Assembly
EYE, EAR & LUNG PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA REQUIREMENTS or
ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses ARE
NOT a replacement for proper eye protection.
WARNING: Non-compliant eyewear can cause serious injury if broken during
the operation of a power tool.
WARNING: Use hearing protection, particularly during extended periods of
operation of the tool, or if the operation is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE USED
WHEN OPERATING A POWER TOOL IN A DUSTY
ENVIRONMENT.
SAVE THESE INSTRUCTIONS FOR REFERENCE
SAFETY GUIDELINES
5
IMPACT WRENCH 054-1216-4
IMPACT WRENCH 054-1216-4
To Next Page
Loading...
Need help?
General
