54
SAFETY GUIDELINES
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
These precautions are intended for the personal safety of the user and others working with the
user. Please take time to read and understand them.
Make sure you read and understand this manual before using this tool. Make sure other users
read and understand this manual before they use the tool.
SAFETY GUIDELINES
PERSONAL SAFETY
Potential hazard that will result in serious
injury or death.
Potential hazard that could result in
serious injury or death.
Potential hazard that may result in
injury or damage to equipment.
Note: The word “Note” is used to inform the readers of something
they need to know about the tool.
WARNING!
CAUTION!
DANGER!
This manual contains information that relates to PROTECTING PERSONAL SAFETY and
PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and
understand it thoroughly before using the product. The symbols listed below are used to
indicate this information.
LOADING CAPACITY
FASTENER DETAILS
OPERATING PRESSURE
AIR CONSUMPTION
WEIGHT
AIR INLET
120 Nails (1 coil)
15° Wire-collated coil nails (3/4 - 1 3/4")
70 - 110 PSI (4.8 - 7.5 bar)
0.043 CF/cycle @ 90 PSI
5 Ib 11 oz (2.58 kg)
3/8" NPT
model no. 058-9816-0 | contact us 1-800-689-9928
CF: Cubic Feet (the volumetric flow rate of air corrected to standardized conditions of
temperature and pressure).
NPT: National Pipe Thread.
To Next Page
Loading...
Need help?
General
