MasterCraft 058-9816-0 User Manual

1110
Compatible compressors
Air system
General use
GUIDELINES FOR PROPER USE AND OPERATION
Potential hazard that could result in serious injury or death.
MASTERCRAFT
®
Quick connector
Quick coupler
Air hose
Lubricator
Regulator (0 to 8.5 bar)
Filter
Cut-off valve
Air compressor
Air-powered
Coil Roofing Nailer
Always use clean, dry, regulated, compressed air at 4.8 to 7.5 bar (70 to 110 PSI).
Do not exceed the maximum or minimum pressures. Operating the tool at the wrong
pressure (too low or too high) will cause excessive noise or rapid wear.
WARNING!
Keep hands and other parts of the body away from the tool’s discharge
and working areas when connecting the air supply. Failure to comply
could lead to serious injury or death.
TECHNICAL INFORMATION TECHNICAL INFORMATION
model no. 058-9809-8 | contact us 1-800-689-9928
This Mastercraft
®
Air-powered Coil Roofing Nailer drives 3/4 to 1 3/4" wire-collated coil nails.
The tool is lightweight and durable, stands up to the elements and provides consistently
accurate results over the life of the tool. An ideal tool for a variety of construction projects,
including installation of asphalt roofing shingles and insulation boards, and features a
high-capacity side-load magazine, adjustable drive depth, durable construction, and more.
Be sure to use a proper air compressor with Mastercraft
®
air-powered tools. The compressor
should be able to supply a minimal air delivery of 4.7 CFM @ 90 PSI to ensure the compressor
can run continuously with the Mastercraft
®
Air-powered Coil Roofing Nailer.
Air Compressor
Size and Power
1 1/2–2 HP 2 1/2 HP 3+ HP
4–6 Gallons
8–11 Gallons
15+ Gallons
Light-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Wood Density
Nail Size Compressor Air Pressure
>0.6 g/cm
3
≤0.6 g/cm
3
<1" (25 mm)
≥1" (25 mm)
<1" (25 mm)
≥1" (25 mm)
90 PSI (6.3 bar)
75 PSI (5.2 bar)
120 PSI (8.3 bar)
110 PSI (7.5 bar)
model no. 058-9816-0 | contact us 1-800-689-9928

MasterCraft 058-9816-0 Specifications

General

Brand	MasterCraft
Model	058-9816-0
Category	Nail Gun
Language	English