MasterCraft 068-1577-2 - User Manual

model no. 068-1577-2
54" (137 cm) Workstation
IMPORTANT
Please read this manual carefully before assembling and
using this product, and save it for reference.
INSTRUCTION
MANUAL
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.

Summary

Assembly Instructions

Tools Required for Assembly

Lists all necessary tools for the correct assembly of the workstation.

Limited Warranty

Additional Limitations

Details further restrictions and limitations applied to the product warranty coverage.

Notice to Consumer

Informs consumers about their legal rights and provincial warranty variations.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document is the instruction manual for the Mastercraft 54" (137 cm) Workstation, model no. 068-1577-2. It provides detailed information on assembly, usage, safety, and maintenance of the product.

Function Description

The Mastercraft 54" (137 cm) Workstation is a storage cabinet designed for indoor use, offering various storage solutions with multiple drawers and a cabinet section. It is equipped with casters for mobility and a rubberwood top for a durable work surface. The workstation is part of a coordinating product line, allowing users to combine it with other Mastercraft storage units to meet different storage requirements. It features a locking mechanism for securing contents.

Important Technical Specifications

• Model No.: 068-1577-2
• Dimensions: 54" (137 cm) Workstation
• Maximum Load Capacity:
  • Overall: 830 lb (376 kg)
  • Shelf: 100 lb (45 kg)
  • Bottom Panel: 150 lb (68 kg)
  • Each Drawer: 70 lb (32 kg)
  • Rubberwood Top: 300 lb (136 kg)
• Components:
  • M6 x 12 hex bolt (4 pcs)
  • Side handle (1 pc)
  • Right side panel (1 pc)
  • M6 x 16 hex socket head screw (52 pcs)
  • Front top beam (1 pc)
  • Drawer panel (4 pcs)
  • M4 x 6 cross-head pan head tapping bolt (16 pcs)
  • M4 x 5 cross-head bolt (16 pcs)
  • Right slide (4 pcs)
  • Top drawer front panel (1 pc)
  • Handle (6 pcs)
  • Middle drawer front panel (2 pcs)
  • Bottom drawer front panel (1 pc)
  • Swivel castor (2 pcs)
  • Drawer liner (4 pcs)
  • Lock (001-010) (1 pc)
  • Locking hook (1 pc)
  • Right door (1 pc)
  • Pin (4 pcs)
  • Rubber ring (2 pcs)
  • Key (001-010) (2 pcs)
  • Left door (1 pc)
  • Shelf bracket (4 pcs)
  • Shelf (1 pc)
  • M8 x 25 hex bolt (16 pcs)
  • Washer (16 pcs)
  • Rigid castor (2 pcs)
  • Bottom panel (1 pc)
  • Magnet (2 pcs)
  • Door stopper (1 pc)
  • Left slide (4 pcs)
  • Left side panel (1 pc)
  • Back panel (4 pcs)
  • Centre panel (1 pc)
  • Rubberwood top (1 pc)
  • M6 x 40 hex tapping bolt (2 pcs)
  • Back top beam (1 pc)
  • Hex wrench (1 pc)
• Tools Required for Assembly: Hex wrench (38), Power Drill (not included), Cross-head Screwdriver (not included; magnetic is preferable), Measuring Tape (not included).

Usage Features

• Assembly: The manual provides step-by-step instructions for assembly, starting with attaching side and bottom panels, installing casters, attaching the centre panel, back top beam, back panels, door stopper, front top beam, slides, solid wood top, and finally the drawers and doors.
• Mobility: Equipped with two rigid casters and two swivel casters, allowing for easy movement. The swivel casters are suggested to be installed on the same side as the side handle for optimal maneuverability. Brakes should be used when the product is not being moved to prevent rolling.
• Storage: Features multiple drawers and a cabinet section with a shelf for organized storage. Drawer liners are provided for each drawer.
• Security: Includes a lock and key mechanism to secure the cabinet doors. The locking hook ensures the doors are properly secured.
• Stability: Designed to be secured to a wall with anti-tip hardware (M6 x 40 hex tapping bolts) for added safety, especially when drawers are open or the cabinet is top-heavy.
• Drawer Operation: Drawers should be filled from the bottom up to prevent the cabinet from becoming top-heavy and tipping over. Only one drawer should be opened at a time.
• Drawer Removal/Replacement: Instructions are provided for removing and replacing drawers, involving black release levers on the inner rails of the slides.
• Coordinating Products: The workstation is designed to integrate with other Mastercraft storage units (e.g., Wall Cabinet, Base Cabinet, Tall Cabinet) to create a comprehensive storage system.

Maintenance Features

• Casters: Apply high-quality bearing grease once a year to the casters.
• Slides: Lubricate the drawer slides twice a year with a spray lubricant or light duty oil.
• Surfaces: Periodically clean surfaces with a soft rag and water.
• Grease and Oil Removal: Grease and oil can be removed with most standard cleaning fluids; a nonflammable cleaning fluid is recommended for safety.
• General Care: Ensure the product is kept on level surfaces to maintain stability. Avoid altering the product in any manner, such as welding external bar locks or attaching electrical equipment, to prevent damage or injury.

MasterCraft 068-1577-2 Specifications