2023 OWNER’S MANUAL
/
140
BALLAST
To fill the ballast tanks, touch FILL ALL. Alternatively, tap the
ballast area to adjust individual ballast zones. Note that some
models feature four ballast tanks and some models feature three:
From the ballast screen, users can fill or empty all ballast zones by
touching FILL or EMPTY ALL. To pause the fill process, tap STOP
ALL. To adjust individual ballast zones, touch the UP or DOWN
arrows at the top or bottom of the ballast zone that you wish to fill
or empty. Alternatively, slide your finger along the ballast progress
bars to adjust ballast zones and set custom fill levels.
ADJUSTING TABS
Tabs allow you to precisely dial in your wakes and waves by
sculpting the water as it leaves the hull bottom. Touch the surf tab
area to adjust individual tabs.
Touching the surf tab area will pull up the following screen.
Make adjustments to each tab by touching the up and down
arrows. Alternatively, slide your finger up or down the slider bar.
Touching this area
will open the surf tab
adjustment screen
Tapping the ballast zone area will pull up the following screen:
Fill or empty all tanks
completely
Individual tank settings.
Tap to open the dedicated
ballast adjustment screen.
To Next Page
Loading...
Need help?
General
