2021 OWNERS MANUAL / 310
tective strap to secure each board. Always secure the surf boards
with the straps and be sure that the boards are fully inserted into
the sleeves, as boards can become dislodged and fall onto the
deck, potentially harming passengers. Never trailer a boat with surf
boards in the surf sleeves, even if the straps are snapped. The force
on the system could cause the straps to break and allow the boards
to come out of the sleeves.
Never tow over the road with anything in the surf sleeve, even
with the straps connected. Wind and air currents can be sucient
to break straps and/or force the surf boards or other items to
dislodge. This could result in damage to vehicles following and/or
serious injury or death to individuals in those vehicles.
GoPro CAMERA MOUNTS
Models
All X and XT models equipped with the Dual Screen Dash are
compatible with the GoPro Hero 4, Hero 5 Hero 6 and Hero 7
models (sold separately). Boats with the Dual Screen Dash option
are equipped with three GoPro mounting locations to support GoPro
compatibility.
Purpose
Three GoPro mounts allow users to easily record riding sessions,
and fun all around the boat. Connecting a camera to the Dual Screen
Dash makes it possible to control the camera’s settings from the
helm while the camera is mounted to the transom or tower.
Location
There are three GoPro mounting locations around the boat. One on
the tower tow-point allows the camera to follow the action at the
end of the tow line, and two mounted to either side of the transom
step are designed to catch surf sets and swimmers o the platform
when the engine is turned o.
Operation
Connecting a GoPro camera to the Dual Screen Dash for the first
time requires a few initial steps that make it simple to display live
action on screen. For information on connecting a GoPro to the dual
screen dash, or using the built-in GoPro software, reference the
Dash and Video Displays section of this Owner’s Manual.
A GoPro camera attaches to the tower and transom mounts exactly
like any other GoPro mount. Use the hand screw to tighten the
GoPro onto the mount.
NOTE: When towing with the GoPro tower mount, tow ropes should
be mounted as indicated in the picture below. Each Tower GoPro
mount has a sticker indicating where the rope should be attached.
2021MCOwnerManualFINAL.indd 310 8/26/20 1:53 PM
To Next Page
Loading...
Need help?
General
