MasterCraft ProStar - Page 10

Touch to add a new rider. See the process
in the next section.
A new rider prole can be setup using
the touch screen. To create a new prole,
press the [Prole] Quick Access Key:
Touch [ADD NEW] to create a new prole.
Type a name for the new prole using the
touch keypad and touch [DONE].
Touch [NEXT] to continue.
Touch the [UP] or the [DOWN] arrow
to Set the speed for this prole.
Touch [Change] to set 3 Event Type.
Touch [Next] to continue.
Set the tab by either sliding the nger
down the ridged area or by touching the
[UP] and [DOWN] arrows. Touch [NEXT]
to continue.
M A S T E R C R A F T P R O S T A R
2014 MasterCraft Owners Manual • ProStar Supplement Page 9-9