EasyManuals Logo

MasterCraft SC20BBL User Manual

MasterCraft SC20BBL
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
headline bars
continuation tabs
notes
warnings
9
If the power tool should start to vibrate abnormally or become noisy, stop the motor
and check immediately for the cause. Abnormal noise is generally a warning of trouble.
Keep guards in place and in working order. Make sure all proper guards and other
safety devices are properly and securely attached before using this product. Do not
operate without guards in place.
Use right appliance. Do not use appliance for any job except that for which it is intended.
Do not charge the battery pack in rain, or in wet locations.
Don’t use in rain.
Keep hands and feet away from cutting area.
Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage
to the eyes or skin. It may be toxic if swallowed.
Battery tools do not have to be plugged into an electrical outlet; therefore, they are
always in operating condition. Be aware of possible hazards even when the tool is not
operating. Take care when performing maintenance or service.
Do not wash with a hose; avoid getting water in motor and electrical connections.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may
use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent
misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
SAFETY GUIDELINES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft SC20BBL and is the answer not in the manual?

MasterCraft SC20BBL Specifications

General IconGeneral
BrandMasterCraft
ModelSC20BBL
CategoryBlower
LanguageEnglish