headline bars
continuation tabs
notes
warnings
9
IMPORTANT SAFETY INSTRUCTIONS
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ...................... Volts
A ...................... Amperes
W ..................... Watts
min .................. Minutes
or d.c. .... Direct current
n
0
..................... No-load speed
................. Class II construction
CFM ................. Cubic feet per minute
MPH ................. Miles per hour
................. WARNING–To reduce the risk of injury, user must read instruction manual.
................. WARNING–To reduce the risk of injury, always wear eye protection.
................. WARNING–To reduce the risk of injury, always wear ear protection.
.......... The logo of UL certification
WARNING!
To reduce the risk of electric shock or damage to the charger and battery, use only the
Mastercraft
®
batteries and chargers listed.
BATTERY PACKS CHARGERS
054-3124-0, 054-7553-4, 054-7557-6 054-3126-6, 054-7559-2
• For best results, your battery and tool should be stored, charged, and used in a
location where the temperature is more than 5°C (41°F) but less than 40°C (104°F).
Store indoors.
SAFETY GUIDELINES
To Next Page
Loading...