Selecting the TRIM tab goes to one of the screens illus-
trated below. These screens display the position of the
installed single-trim tab or dual-trim tabs.
Menu Display Screen
Selecting the MAIN tab goes to the screen illustrated in
the next column. Any information available to the instru-
mentation system may be selected by the driver to be
displayed in this screen. This screen is organized into
four (4) quadrants with the user-selected information
digitally displayed in each quadrant.
Menu Display Screen
To change the information displayed simply:
•
Press the UP or DOWN arrows to highlight the quad-
rant that you wish to change
• Press SELECT to access the pull down menu
• Using the UP or DOWN arrows highlight the desired
information.
• Press SELECT again to store the change
MasterCraft boats equipped with the video display gauge
feature integrated Perfect Pass Wakeboard Pro speed
control software.
The Perfect Pass application can be entered by selecting
the CRUISE tab on the MENU screen or pressing the re-
mote Perfect Pass button. Perfect Pass is turned on and
off by pressing the remote perfect pass button. Please
refer to the Perfect Pass manual for detailed operating in-
structions.
2008 MasterCraft Owners Manual Page 5-3
To Next Page
Loading...
Need help?
General
