281
/
2023 OWNER’S MANUAL
BIMINI CANVAS
Models
All MasterCraft Models have optional bimini tops. Each tower style
has a bimini designed specifically for that tower (ProStar optional
windshield mounted bimini).
Purpose
MasterCraft’s bimini is designed to enhance comfort and protect
boaters from the sun’s rays while on the water.
Location
Bimini tops are designed and built to match each of MasterCraft’s
tower options. The bimini is integrated into its respective tower
and will usually cover the helm and/or midsection of the boat.
Bimini legs and canvas fold to allow minimal wind resistance when
towing, during storage or when riding across a body of water at
high speeds. When folding the bimini up or down, be careful to
avoid pinching fingers between the support legs.
Operation
See each tower’s respective bimini section immediately following.
When trailering a boat or when operating the boat at high speeds,
fold the bimini down to reduce wind resistance. High speeds put
large amounts of air pressure on the bimini legs and can cause
them to collapse causing serious injury and damage to the boat.
Z6, Z8, AND Z10 BIMINI
Models
All boats equipped with a Z6, Z8, or Z10 Tower. Though the biminis
look slightly dierent, they function identically.
Purpose
The Z6, Z8, and Z10 biminis cast shade on the cockpit of the boat
to keep occupants cool and protected from the sun’s rays.
Location
Integrated into the Z6, Z8, and Z10 towers.
Operation
Biminis come pre-installed from dealers on all models.
To Next Page
Loading...
Need help?
General
