287
/
2023 OWNER’S MANUAL
MOORING COVER WITH
ANTI-POOLING SYSTEM
Models
Under tower and over tower mooring covers are optional on all X,
XT and NXT Series models.
Purpose
Anti-pooling boat covers are designed to prevent water and
debris intrusion while the boat is docked or stored. Mooring
covers mount around the boat and cover everything above the
stainless steel rubrail.
Under tower mooring covers feature an integrated anti-pooling
system that lifts the cover up so that snow or water drains o the
side rather than pooling on top of the cover. Anti-pooling covers use
a drawstring system to lift the canvas mooring cover up towards the
tower. The anti-pooling cover is designed to be used in conjunction
with anti-pooling poles during long-term storage, or on long road
trips. Poles are required when trailering the boat for trips lasting
more than one (1) hour, at speeds over 70 MPH. Poles are also
required for use with the mooring cover for long term and
seasonal storage.
Location
Mooring covers mount over the boat and use ratcheting straps to
secure them snugly around the boat. The anti-pooling system on
under tower covers loops over the tower tow point and is secured in
place by pulling on the drawstring mounted to the aft portion of
the canvas.
Operation
To install a boat cover with the anti-pooling drawstring:
1. Cover the bow and the forward portion of the cockpit with the
canvas designed to fit the bow.
2. Continue covering the boat from bow to stern until you reach the
windshield. Ensure that the windshield door is closed. Continue
covering the boat.
3. When you reach the tower
base, mount the neoprene
anti-pooling loop over the
tow point on the tower.
Buckle the buckles on both
sides of the tower and
ensure that the velcro is
secured around the
tower legs.
To Next Page
Loading...
Need help?
General
