15
MAINTENANCE
WARNING! When servicing, use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage.
CAUTION! Before performing maintenance or cleaning, remove the bat-
tery pack from the jig saw.
1. The tool may be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
2. Use a small brush or the air discharge of a small vacuum cleaner brush to
clear dust or debris from the air vents on the motor housing.
3. Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents. Use
clean cloths to remove dirt, dust, oil, grease, etc.
4. Lubricate the roller guide from time to time with a drop of oil. It will extend
the life of the roller.
To Next Page
Loading...
