MasterForce 241-0779 - Safety Symbols for Your Tool; Rules for Safe Operation; Know the Tool; Important Servicing Information

page 2
TABLE OF CONTENTS
Safety Symbols................................... Page 2
Safety Instructions............................... Page 2
Description.......................................... Page 7
Assembly and Adjustment................... Page 8
Operation............................................. Page 9
Maintenance...................................... Page 10
Warranty............................................ Page 15
The label on your tool may include the
following symbols.
V............................................................. Volts
A............................................................ Amps
Hz........................................................... Hertz
W........................................................... Watts
min..................................................... Minutes
~....................................... Alternating Current
SPECIFICATIONS
Rating 120 V 60Hz
Motor 7.5 A
Rated Speed 11000 RPM
Wheel diameter 4 1/2”
Arbor size 5/8”
Cord length 8’
Weight 5 lb 8 oz
SAFETY SYMBOLS FOR YOUR TOOL
RULES FOR SAFE OPERATION
KNOW THE TOOL
To reduce the risk of injury, user must read
instruction manual.
IMPORTANT
This tool should only be serviced by a
qualied service technician. For more
information, call the toll-free helpline:
1-866-917-4374.
GENERAL SAFETY RULES FOR
ALL POWER TOOLS
WARNING: To reduce the
risk of injury, the user must read the
Operator’s Manual.
WARNING: Read all safety
warnings and instructions. Failure to
follow the warnings and instructions
may result in electric shock, re and/or
serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your AC-powered (corded) power tool or
battery-powered (cordless) power tool.
.......................................... Direct Current
n
o
........................................... No-load Speed
................................... Class II construction
.../min........ Revolutions or Strokes per minute
....... Indicates danger, warning caution. It
means attention! Your safety is
involved..
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in an
explosive environment, such as in the
presence of ammable liquids, gases
or dust. Power tools create sparks that
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) Electrical safety
a) The plug on the power tool must
match the outlet. Never modify the
plug in any way. Do not use adaptor
plugs with earthed (grounded) power
tools. Unmodied plugs and matching
outlets will reduce the risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.