MasterForce 241-0779 - Description of the Angle Grinder; Know the Angle Grinder

page 7
KNOW THE ANGLE GRINDER
(Fig. 1)
The machine is intended for grinding metal
and stone materials without using water.
Before attempting to use this angle grinder,
become familiar with all its operating features
and safety requirements.
DESCRIPTION
WARNING: Do not allow
familiarity with the angle grinder to cause
carelessness. Remember that a careless
fraction of a second is sufcient enough
to inict severe injury.
WARNING: Remove the angle
grinder from the carton and examine
it carefully. Do not leave carton or any
packaging material until all parts are
examined.
FIG. 1
1
2
3
4
5
6
7
8
10
9
11
1. Spindle-lock button 7. Outer ange
2. Spindle direction 8. Wrench
3. Spindle 9. ON/OFF switch
4. Non-cutting guard 10. Side handle
5. Inner ange
11. Insulated gripping
surface
6. Grinding wheel