MasterForce CUB401 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OPERATOR’S MANUAL

80V BRUSHLESS

CULTIVATOR

270-2454

2800194ME

CUB401

To Reduce The Risk Of Injury, User Must Read

CAUTION

And Understand Operator’s Manual. Save These Instructions For

Future Reference.

Table of Contents

Questions and Answers:

D
Debra MooreAug 7, 2025
Why does my MasterForce Tiller motor shut down while working?
- T
  Tristan MeyersAug 7, 2025
  If the MasterForce Tiller's motor shuts down while you're working, there are a few potential causes. First, ensure the battery pack is tightly installed in the machine. It's possible it came loose during operation. Second, the battery pack may be out of power and needs charging. Finally, if the machine is damaged, stop using it and contact a service center for assistance.
B
Brandon LivingstonAug 16, 2025
What to do if MasterForce Tiller motor runs but tines do not move?
- S
  Sharon ReedAug 17, 2025
  If the motor of your MasterForce Tiller runs but the tines don't move, it could be due to several reasons. It's possible that the tines are blocked; in this case, remove the battery and clear any blockage from the tines. Another potential cause is damage to the machine or gear train failure, in which case you should contact a service center.

MasterForce CUB401 Specifications

General

Brand	MasterForce
Model	CUB401
Category	Tiller
Language	English