3
SAFETY INFORMATON
1.2 Operating Safety
Failure to follow instructions in this manual may lead to serious injury or even death! This
equipment is to be operated by trained and qualified personnel only! This equipment is for
industrial use only.
The following safety guidelines should always be used when operating the this concrete saw:
■ DO NOT operate or service this equipment before reading the entire manual.
■ This equipment should not be operated by persons under 18 years of age.
■ NEVER operate this equipment without proper protective clothing, shatterproof glasses,
steel-toed boots and other protective devices required by the job.
NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
■ NEVER operate this equipment under the influence or drugs or alcohol.
■ NEVER use accessories or attachments, which are not recommended by MASTERPAC for
this equipment. Damage to the equipment and/or injury to user may result.
■ The manufacturer does not assume responsibility for any accident due to equipment
modifications.
■ Whenever necessary, replace nameplate, operation and safety decals when they become
difficult to read.
■ ALWAYS check the machine for loosened threads or bolts before starting.
■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before
servicing engine or saw.
■ High Temperatures – Allow the engine to cool before adding fuel or performing service and
maintenance functions. Contact with hot components can cause serous bums.
■ The engine section of this saw requires an adequate free flow of cooling air. NEVER operate
the saw in any enclosed or narrow area where free flow of the air is restricted. If the air flow is
restricted it will cause serious damage to the saw or engine and may cause injury to people.
Remember the saw’s engine gives off DEADLY carbon monoxide gas.
■ ALWAYS refuel in a well-ventilated area, away from sparks and open flames.
■ ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the
engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion
could result from fuel vapors, or if fuel is spilled on a hot engine.
■ NEVER operate the saw in an explosive atmosphere or near combustible materials. An
explosion or fire could result causing severe bodily harm or even death.
■ Topping-off to the fuel filler port is dangerous, as it tends to spill fue。
■ NEVER use fuel as a cleaning agent.
■ ALWAYS read, understand, and follow procedures in operator’s Manual before attempting to
operate equipment.
■ ALWAYS be sure to operator is familiar with proper safety precautions and operating
techniques before using the saw.
To Next Page