MasterPower 5.6KW - Faults Reference Code

38
Operation mode
Description
LCD display
Line Mode
The unit will provide
output power from the
mains. It will also
charge the battery at
line mode.
Charging by utility and PV energy.
Charging by utility.
If “SUB” (solar first) is selected as output source
priority and solar energy is not sufficient to provide the
load, solar energy and the utility will provide the loads
and charge the battery at the same time.
If either “SUB” (solar first) or “SBU” is selected as
output source priority and battery is not connected,
solar energy and the utility will provide the loads.