To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt MASS 24/25-2 and is the answer not in the manual?
General| Output Voltage | 24 V |
|---|---|
| Output Current | 25 A |
| Weight | 3.5 kg |
| Number of Battery Outputs | 2 |
| AC Frequency | 50/60 Hz |
| Efficiency | 90% |
| Protection | Over temperature, Overload, Short circuit |
| Cooling | Fan |
| Operating Temperature | -20°C to +50°C |
| Charging Algorithm | 3-stage (bulk, absorption, float) |
Covers general safety and operating instructions for the Mass Charger.
Addresses risks associated with explosive gases near batteries.
Details the functions and indicators on the Mass Charger's front panel.
Explains the intelligent 3-stage charge characteristic.
Provides guidance on AC and DC wiring for the Mass Charger.
Details the minimum required battery capacity for different models.
Explains how to operate the DIP switches for configuration.
Presents detailed technical specifications for the Mass Charger models.
Provides physical dimensions for the Mass Charger enclosure.
Provides critical warnings and precautions for battery handling.
Instructions for turning the battery charger on.
Instructions for turning the battery charger off.
Explains how temperature affects charge voltages and battery life.
Guidance on selecting a suitable location for installing the Mass Charger.
Instructions for making system connections before powering on.
Explains the use and compensation for battery isolators.
Details how to connect a secondary smaller battery for maintenance charging.
Explains how to use the voltage sense function for charge time compensation.
Describes the integrated alarm function and its modes.
Illustrates the location of various connections and modules.
Details the specific functions assigned to each DIP switch.
Provides rules and steps for setting up a MasterBus network.
Details configurable parameters available via the MasterBus network.
Details performance characteristics related to 230V AC input.
