Mastervolt SmartRemote 77010500

10000020980/00
SmartRemote Behavior
Main menu
Enter standby
Brightness
Auto shutdown
Select
menu item
See main
menu content
SmartRemote
scans MB for
devices
Connect
SmartRemote
to MB
Start
Select
device
Short press any
button (slide
out will appear)
CombiMaster: Inverter ON/OFF
ChargeMaster: Charger ON/OFF
SmartRemote lists all
compatible devices
found in network
Press up or down button
to select the AC IN limit
MasterShunt
is the same
Press left+right button for
3 sec. to enter standby
Press left+right button for less
than 3 sec. to show main menu
Press any button to switch
SmartRemote back on

Mastervolt SmartRemote 77010500 Specifications

General

Brand	Mastervolt
Model	SmartRemote 77010500
Category	Remote Control
Display	LCD
Connection	Wired
Protection Degree	IP20
Compatibility	Mastervolt inverters and chargers
Functions	Monitoring and control of system parameters
Mounting	Wall mount
Operating Temperature	-10 to +50 °C
Supply Voltage	12 V

Summary

SmartRemote Menu Structure

Enter standby Mode

Shuts down the SmartRemote after pressing left and right buttons for 3 seconds.

Adjust Brightness

Adjusts screen brightness in 5% increments using up/down buttons.

Configure Auto Standby

Configures automatic shutdown after 2, 5, or 10 minutes.

Set SmartRemote Language

Sets the language of the SmartRemote itself.

Set Paired Device Language

Sets the language for the connected device.

Unpair Connected Device

Removes the connection to the currently paired device.

View About Information

Displays SmartRemote version, revision, bootloader, and bus voltage.

Exit Main Menu

Exits the main menu after 10 seconds of inactivity or selection.