Mastervolt SmartRemote 77010500 User Manual

SmartRemote Menu Structure
Language
English
Nederlands
Deutsch
(Paired)
Brightness
100%
Auto standby
Never
Enter standby
At any time pressing left
and right button for 3
seconds will shutdown the
SmartRemote
Unpair device
Are you sure?
About
Version: 1.1.9
Revision: AA0101
Bootlaoder ver.:0.1.0
Bus voltage: 13.35V
Press

to shutdown the SmartRemote
immediately.
Press

to return to the Main menu.
Press the up or down button to increase or
reduce the brightness in steps of 5
% .
Press

to confirm your choice and return
to the Main menu.
By default, the SmartRemote does not shut
down automatically.
Other options are: 2, 5, or 10 minutes.
Press

to confirm your choice and return
to the Main menu.
Language is the language of the
SmartRemote itself.
Paired language is the language of the
connected device.
Press

to confirm your choice and return
to the Main menu.
Press

to unpair the device from the
SmartRemote immediately.
Press

to return to the Main menu.
Information “About” the SmartRemote.
Press

to return to the Main menu..
Enter the main menu by pressing both the left + the right button at the same time, for less than 3 seconds.
Main menu:
• Enter standby (pressing any button will turn the SmartRemote back on.)
• Brightness
• Auto standby
• Language
• Paired language
• Unpair device
• About
• Exit menu
The SmartRemote will exit the main menu if no button is pressed within 10 seconds, or when you select “Exit menu”.
Shaded fields have the focus.

Mastervolt SmartRemote 77010500 Specifications

General

Brand	Mastervolt
Model	SmartRemote 77010500
Category	Remote Control
Language	English