To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt Sunmaster XS2000 and is the answer not in the manual?
General| Model | Sunmaster XS2000 |
|---|---|
| Rated Power | 2000 W |
| Maximum DC Power | 2200 W |
| Output Power | 2000 W |
| AC Voltage | 230 V |
| Output Voltage | 230 V |
| Frequency | 50Hz |
| Maximum AC Power | 2000W |
Details about the Mastervolt Sunmaster inverter and its intended purpose as a solar inverter.
Guidelines for electricians and end-users on the manual's content for installation and operation.
Manual applies only to standard Mastervolt-delivered versions of the Sunmaster.
Mastervolt's five-year product guarantee terms and conditions for the Sunmaster.
Mastervolt's disclaimer for consequential damage and errors found in the manual.
Procedure for making changes to the Sunmaster requires prior written permission from Mastervolt.
Location and importance of the identification label for technical information and service.
Explanation of pictograms and symbols used in the manual for safety and cautions.
Specifies the Sunmaster's intended use and the required installation qualifications.
User and installer must have access to and be familiar with this manual.
Installation, maintenance, and repair must be performed by qualified electricians only.
Highlights dangers of high DC/AC voltages and advises against working on live systems.
Instructions for unpacking the Sunmaster and checking for any possible damage.
Configuration of the Sunmaster for local grid regulations, including ENS/QNS device details.
Guidelines for optimal installation location, temperature range, and necessary clearances.
Requirements for AC wiring, including double insulation, wire diameter, and resistance limits.
Guidelines for grounding the Sunmaster and compliance with local codes and ordinances.
Requirements for solar system voltage and PV power connected to the inverter.
Information on the mandatory or optional use of a DC switch for PV module disconnection.
Instructions for connecting two PV strings in parallel to the Sunmaster's solar inputs.
Using Y-adapters to connect multiple PV strings to the Sunmaster's solar inputs.
General safety precautions for installation, including disconnecting power sources.
List of essential parts, tools, and materials required for the Sunmaster installation.
Detailed instructions covering mounting bracket, Sunmaster placement, and connection steps.
Specific requirements for AC wiring sealing in Italy, as mandated by ENEL.
Procedures for switching on the Sunmaster and selecting the country code for operation.
Instructions for safely disconnecting and removing the Sunmaster from the installation.
Overview of automatic operation, shutdown, and the function of the cooling fan.
Details on LCD display, actual readings, historical data, and total energy revenues.
Viewing system info, configuring settings, and understanding power limitation.
Troubleshooting failures, error codes, and the 3-phase block security measure.
Troubleshooting for 'NONE', 'Insufficient irradiation', and 'No power' error codes when the LED is off.
Troubleshooting for errors like 'COUNTRY', 'TEMP HI', 'NO GRID', 'ENS OFF' when the LED is on.
Troubleshooting steps for critical errors such as NTC FAIL, I2C FAIL, ENS FAIL, and HW FAIL.
Detailed technical data for solar input, AC output, and general specifications of the Sunmaster.
Dimensional drawings illustrating the physical size and layout of the Sunmaster units.
Part numbers and descriptions for Y-adapters, communication cables, and assembly kits.
Information on software, dataloggers, and PC link converters for PV system monitoring.
Purpose of the Italy Self Test to verify AC voltage and frequency disconnection limits.
Procedure for testing the high limit of AC voltage (UH) for inverter safety disconnection.
Procedure for testing the low limit of AC voltage (UL) for inverter safety disconnection.
Procedure for testing the high limit of AC frequency (FH) for inverter safety disconnection.
Procedure for testing the low limit of AC frequency (FL) for inverter safety disconnection.
Compliance certificate for the VDE-0126 standard regarding automatic disconnection devices.
Declaration of conformity for CE marking, indicating compliance with EU directives.
Certificate of compliance with the AS4777 standard for grid connection requirements.
