þ
þ
þ
energy
bulbs
.co.uk
Mon-Fri: 8:30am - 6:30pm | Sat & Sun: 11am - 5pm
0800 043 8978
or
0121 250 2180
Quick Order Hotline
Guaranteed Low Prices
Huge Stock Available
Mastervolt Stockist
BEFORE YOU START
EN / Sunmaster XS4300-3200-2000 / October 2011 11
3.9 GENERAL SAFETY AND INSTALLATION
PRECAUTIONS
WARNING
Be sure that all wiring is disconnected from
any power source during the entire
installation.
CAUTION!
• Short circuiting or reversing polarity may
lead to damage to the Sunmaster, the
cabling and/or the terminal connections.
• Follow all steps of the installation
instructions in order of succession as
described.
• The DC switch, if installed, must stay in
the OFF-position during the entire
installation.
3.10 THINGS YOU NEED FOR INSTALLATION
Make sure you have all the parts you need to install the
Sunmaster:
• The Sunmaster + mounting bracket (included).
• Four screws (with plugs) to mount the Sunmaster.
Maximum diameter: 5 mm. Use mounting materials
which are suitable to carry the weight of the Sunmaster
• Hexagonal socket wrench # 4 to open the connection
compartment of the Sunmaster.
• Flat blade screw driver.
• Masterbus communication cables.
• RS485 communication cables.
To Next Page
Loading...
