LEANLINE III TC
&
III TC Lo
SECTION THREE
Users Instructions
It is important that al the fuel bed and moulded shapes are positioned as shown in these
instructions.
Two Alternative Fuel beds are available: -
l
A) Coal
B) Pebble
Identify the fuel bed nd assemble as shown below.
COAL FUEL BED
Some soot deposit~ will form on the coals, this is perfectly normal and adds to the
realism of the appl"ance.
The Loose coal set consists of: -
• Rear Matrix
• Front Coal
I
• Loose CO~IS- 9 coal 'A' (Triangular)
10 coal 'B' ('L' Shaped)
• Ensure the rear matrix is in position as shown.
Positioned well back against the rear of the
appliance.
• Ensure the front coal is located behind the burner
fascia as shown.
a8201
To Next Page
Loading...