EasyManua.ls Logo

Matco Tools ADMM50 - Electrical Measurement Specifications

Matco Tools ADMM50
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Automatic zero adjustment
Over range indicator (except 15 A function). Displays "OL"
on LCD
Low battery indicator. Displays battery symbol on LCD
Automatic power shut off (after 10 idle minutes)
Pollution Degree 2
Measuring circuit category II
Operating environment:
Temperature - 32° to 104° F. (0° C to 40° C)
Humidity - Less than 80% relative humidity (non-condensing)
Altitude - up to 6562 ft (2000 meters)
Storage environment:
Temperature - 4° to 140° F (- 20° to 60° C)
Humidity - Less than 90% relative humidity (non-condensing)
Power Supply: One 9-volt battery
Fuse: 0.500A/250V 5X20 mm (Radio Shack, GMA/270
series; #270-1047) fuse
Dimensions:
Height - 6.81 in. (173 mm)
Width - 6.57 in. (167 mm) (includes test lead clips)
Depth - 1.69 in. (43 mm)
Weight (including battery): approximately 9.1 oz (260 g)
ELECTRICAL SPECIFICATIONS
DCV
Range Resolution Accuracy Overload Protection
400mV 100μV 250V DC/AC RMS
4V 1mV
40V 10mV
400V
600V
1V
±(0.8% of
reading +5
digits)
600V DC/AC RMS
Input Impedance: 10MΩ for all ranges.

Related product manuals