Need help?Do you have a question about the Matco Tools ADMM50 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| DC Voltage | 400mV/4V/40V/400V/600V |
| AC Voltage | 4V/40V/400V/600V |
| DC Current | 400µA/4000µA/40mA/400mA/10A |
| AC Current | 400µA/4000µA/40mA/400mA/10A |
| Resistance | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Type | 9V |
| Overload Protection | Yes |
| Auto Power Off | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Safety Rating | CAT III 600V |
| Capacitance Range | 200µF |
| Frequency Range | 10Hz-10MHz |
| Battery Test | 1.5V, 9V |
| Temperature Range | -20°C to 1000°C |
Essential safety rules for operating the multimeter.
Specific safety advice when working on vehicles.
Overview of the multimeter's general features and capabilities.
Detailed electrical specifications for various measurement ranges.
Details Voltage, Resistance, Continuity, Diode, Frequency, Pulse Width, Duty Cycle.
Covers Temperature, RPM, Current, Dwell Angle, and Ignition System tests.
Explains selector switches, buttons, and input jacks for tester operation.
Step-by-step guide for measuring AC and DC voltages.
Procedures for resistance measurement and diode testing.
How to perform continuity tests and measure frequency.
Steps for measuring pulse width, duty cycle, and temperature.
Guides for measuring current and RPM, including ignition systems.
Procedure for measuring dwell angle of breaker points.
How to use the data hold feature to lock readings.
Explains how to record and recall MAX/MIN readings.
Instructions for replacing the unit's battery.
Instructions for replacing the internal fuse.
Guidelines for keeping the tester clean and dry.
Details the terms, conditions, and limitations of the one-year warranty.
Provides contact details for technical support and service.
To Next Page
