Mateksys F411-WSE - User Manual

To Next Page

Jun.2019 Rev 1.0 www.mateksys.com

FLIGHT CONTROLLER F411-WSE

QUICK START GUIDE

MCU: 100MHz STM32F411CEU6

IMU: MPU6000 (SPI)

Baro: BMP280 (I2C)

OSD: AT7456E (SPI)

Blackbox: No

2x Uarts

2x Softserial_Tx

2x Motors & 4x Servos outputs

1x I2C

4x ADC (VBAT, Current, RSSI, AirSpeed)

Switchable Dual Camera Inputs

6~30V DC IN (2~6S LiPo)

Current Sense 78A, Scale 423

BEC 5V 2A cont. 3A Max. for FC

BEC Vx 3.5A cont. 5A Max. for servos, 6V option

LDO 3.3V 200mA

Vbat filtered output power

TARGET: INAV MATEKF411SE

Need help?

Do you have a question about the Mateksys F411-WSE and is the answer not in the manual?

Summary

Specifies the flight controller target and peripheral settings for INAV firmware.

Details configuration for selecting and managing multiple camera inputs.

General