Matica MC110 - User Manual

MC110 - Quick Start Guide - page 1
maticagroup.com
1 2
Open the carton box
• Carefully remove the
printer and remove plastic.
• Remove accessories
package.
• Retain and store all
packing materials for
future use. Any warranty
returns should be sent in
original packaging.
Contents check list
1. MC110 printer
Inside printer:
2. Ribbon cartridge
Accessories package:
3. Power supply
4. Power cord
5. USB cable
6. Cleaning card
7. Cleaning swab
Please make sure that all the components and accessories are included in the box.
If there are missing or damaged items, please contact your dealer for assistance.
Connect USB cable
• Connect the printer to the computer
using the USB cable when instructed
during driver installation.
Register your printer:
www.maticagroup.com/register
• Validate your warranty.
• Receive notifications of
driver and firmware updates.
• Gain easy access to support.
4 5
Power your printer
• Connect the AC power supply.
• Power ON the printer.
Download and install driver
• Follow the online step-by-step
guide to download and install
the printer driver.
Visit:
www.maticagroup.com/install
Or scan the QR code below
using your computer’s
webcam to the installation
page and follow the online
instructions.
3
Remove card feeder packaging
• Open the front card feeder door and remove
the protective cardboard.
1
2
3
4
5
6
7
Register: via mobile
• Scan the QR code to the
registration page and follow
the online instructions.
MC110 QSG A4 ENG V4

Summary

Unboxing and Initial Setup

Open Carton Box

Carefully remove the printer and accessories from the carton, retaining packing materials for future use.

Contents Check

Verify all listed components and accessories are present in the box; contact dealer if items are missing or damaged.

Card Feeder Packaging Removal

Open the front card feeder door and remove the protective cardboard packaging.

Connecting and Registering Printer

Powering the Printer

Connect the AC power supply and turn on the printer.

Printer Registration

Register your printer online or via mobile to validate warranty, receive updates, and access support.

Installing the Ribbon Cartridge

Prepare Printer and Cartridge

Open the printer top cover and remove the ribbon cartridge system from the printer.

Load Ribbon Reels

Place red and grey reels into the cartridge system, ensuring secure attachment to clips.

Insert Ribbon Cartridge

Insert the ribbon cartridge into the printer, aligning with guides, and close the top cover.

Loading Cards and Final Steps

Load Cards into Printer

Open the front card door and insert cards according to the orientation sticker inside.

Adjust Card Thickness

Open the top cover, adjust the card thickness lever, and close the top cover.

Printing Readiness

The printer is now ready to start printing.

Matica MC110 Specifications

General

Print Technology	Dye-sublimation
Print Area	Edge-to-edge
Card Capacity (Input)	100 cards
Card Capacity (Output)	30 cards
Resolution	300 dpi
Interface	USB
Connectivity	USB 2.0
Encoding Options	Magnetic stripe encoding, Contact smart card (optional), Contactless smart card (optional)
Power Supply	100-240V AC, 50/60Hz
Operating System Compatibility	Windows 7, 8, 10
Card Thickness	0.25 - 1.0 mm (10-40 mil)