Need help?Do you have a question about the Matrix Infinity MA-PWM30A and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Output Voltage | 14.4V-18V |
| Output Current | 30A |
| Charging Mode | PWM |
| Power | 360W |
| Charging Ports | 1 |
| Protection Features | Overcharge, Overload, Short Circuit, Reverse Polarity |
Quickest and easiest mounting using plastic spacers and self-tapping screws on a flat surface.
Requires cutting a panel opening based on dimensions for integrated mounting.
Explains LCD indicators for battery voltage, charging current, capacity, and temperature.
Details the 5-stage charging algorithm: Soft, Bulk, Absorption, Equalizing, and Float.
Describes how 6 LEDs indicate charging status and battery conditions.
Connects for optimized charging and battery over-temperature protection.
Connects to display controller information remotely for specific locations.
Details rated amps, input/output voltage, voltage drop, and controller operating voltage.
Covers minimum charging voltage, soft start, bulk, absorption, equalizing, and float voltages.
Lists protections like reverse polarity, short circuit, over-temperature, and transient over-voltage.
Includes controller material, terminal size, mounting, IP grade, and net weight.
Specifies operating temperature, storage temperature, and humidity range.
To Next Page