21
SUSPENSION ELLIPTICAL™ TRAINER |
ASCENT TRAINER
®
ASSEMBLY
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
suspension elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent
damage to the suspension elliptical, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your unit’s serial number located..
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
*The console serial number can be found in the Manager Mode.
WARNING
SERIAL NUMBER LOCATION
CONSOLE SERIAL NUMBER:
MODEL NAME: MATRIX
FRAME SERIAL NUMBER:
ep_ascent_om_r2.2.indd 20-21 9/26/11 11:50 AM
To Next Page
Loading...
