18
the device. Many accidents have their origins
in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accessories,
inserted tools etc. in accordance
with these instructions and advice, and
the stipulations drawn up for this particular
type of device. In doing this, take
into account the working conditions
and the task in hand. The use of electrical
power tools for purposes other than those
intended can lead to dangerous situations.
5. Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit
using only the charger recommended
by the manufacturer. Chargers are often
designed for a particular type of rechargeable
battery unit. There is the danger of re if other
types of rechargeable battery units are used.
b) Only the rechargeable battery units
supplied are to be used with an electrical
power tool. The use of other rechargeable
battery units may lead to the danger of
injury or re.
c) When they are not being used, store
rechargeable battery units away from
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Shortcircuiting the contacts of a rechargeable
battery unit may result in heat damage or re.
d) Fluids may leak out of rechargeable
battery units if they are misused. If
this happens, avoid contact with the
uid. If contact occurs, ush the aected
area with water. Seek additional
medical help if any of the uid gets
into your eyes. Escaping battery uid may
cause skin irritation or burns.
CAUTION! DANGER OF EXPLOSION!
The batteries must never be recharged!
Safety advice for all uses
General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:
a) This electrical power tool is intended
for use as a grinding, sanding, wirebrushing,
and disc-cutting machine.
Observe all the safety advice, instructions,
information in gures and all
other information you received with
this device. If you do not observe the following
advice it could lead to electric shock, re
and / or serious injury.
b) Normative statement / advice for this tool is
not applicable.
c) Do not use any accessory not specically
intended by the manufacturer
for this electrical power tool. Although
an accessory may t on your electrical power
tool, this does not on its own guarantee that it
can be safely used.
d) The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool. An accessory rotating
faster than its permitted speed could disintegrate
or y o.
e) The external diameter and the thickness
of the attachment must be compatible
with the dimensions of your electrical
power tool. Attachments that are not
dimensionally compatible cannot be adequately
guarded or controlled.
To Next Page
Loading...
Need help?
General
