To Next PageTo Next Page
Need help?Do you have a question about the Matrix AG 2200-230 and is the answer not in the manual?
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, use common sense, dress properly, and avoid distractions.
Do not force the tool, use correct tool, maintain it, and disconnect power for adjustments.
Tool intended for grinding/cutting; not for polishing/wire brush.
Use compatible, undamaged accessories with correct speed and size.
Wear eye protection, dust masks, gloves, etc. as needed for safety.
Handle tool safely, manage cord, keep bystanders away, clean vents.
Precautions for carrying, ventilation, flammable materials, and liquid coolants.
Understand kickback causes and how to prevent it with grip and body positioning.
Specific guidelines for wheel types and guards during grinding/cutting.
Use correct wheels for application, proper flanges, and avoid worn wheels.
Avoid jamming, excessive pressure, control body position, and support workpieces.
Safely stop the tool when binding and carefully restart cuts.
Pay attention to all signs and symbols shown in instructions and on the tool.
Identifies key components like spindle lock, switches, handle, and guard.
Check mains compatibility, fit handle, and set guard correctly.
Run new wheels at idle for 1 minute to check for vibrations.
Covers switching on/off, safety switch, adjusting working angle, and changing wheels.
Details flange setups for different wheels and motor ventilation importance.
Covers wheel specifications, direction, and rough grinding mode.
Prohibitions on asbestos, cutting wheel use, and guidance on power cable replacement.
Details mains voltage, power input, speed, diameter, protection class, and noise/vibration levels.
General