press the Number key 3 to select the SM option or scroll
to
the option and press the ENT key. The system will prompt
for
the new Gateway IP address.
Key in the new IP settings for the above parameters as
shown in the above display. The system will display the
status of the updated settings and return to the default
screen.
Connecting the COSEC DIRECT DOOR to the
Monitoring PC
Connect your computer's Ethernet port and the DOOR's
Ethernet Port by using either of two below mentioned methods.
1. Connect both the computer's and the DOOR's Ethernet port
to an Ethernet hub with standard straight-through Ethernet
patch cables as shown.
Ethernet Switch
DIRECT DOOR
COSEC
Monitor PC
2. Connect the computer's Ethernet port directly to the DOOR's
Ethernet port with an Ethernet crossover/ Straight cable. A
crossover cable is a cable that maps all output signals on
To Next Page
Loading...