11
6.1 USING ENGINEERING MODE
To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager appears on the middle LED display. Press the
LEVEL UP or DOWN key to scroll to Engineering. Press ENTER to go into Engineering Mode.
CUSTOM SETTING DEFAULT OPTIONS DESCRIPTION
Machine Type E3x H3x, U3x, R3x, E3x, S3x, A3x The machine type should be the
E3x for the Suspension Elliptical.
Power Save Time 30 Seconds 30-60 Seconds Power saving time for the self
powered frame.
Pause Time 30 Seconds 15 - 120 Seconds For non self powered frames
only. Not used on this model.
Serial Number N/A N/A Serial Number input is available
for both the Console and Frame.
Use the number keys and UP
/ DOWN LEVEL keys to enter
Engineering Mode. Due to the
limited LED charactors, 2 layers
are used to enter the serial
number. First Layer:
- PPPPP V
- PPPPP is the product name.
- V is the version. If the
version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08,
09, 10).
- nnnnn is the actual serial
number.
Use the UP / DOWN LEVEL keys
to navigate the layers and the
number keys to input the serial
number. The product name is
dependent on the Machne Type
setting.
For example, the console is
EP603 with ver. A and the
manufactured date is 2011.08
with 98765. The frame is EP304
with ver. A and the manufactured
date is 2011.06 with 12345. Their
serial numbers are:
Console SN: EP603 1rst layer,
110898765 2nd layer.
Frame SN: EP304 1rst layer,
110612345 2nd layer.
Sleep Time Off Off or On (1-30 Minutes) If there is no use of the machine
over a period of time, the console
LEDs will turn off (go into sleep
mode). This is for AC powered
units only.
Audio Source Off Off / TV / PC TV / Remote TV Manual setting that sets which
outside TV will have audio
through the console audio ports.
Disable Errors No Yes or No No - Shows A-C class error
codes. Yes - Shows only C class
error codes.
Speed Units Mile Mile or Kilometer Set for Mile or Kilometer.
CHAPTER 6: ENGINEERING MODE
To Next Page
Loading...
Need help?
General
