Matrix FRAME User Manual

MATRIX FRAME - Installation Manual Page 2
Safety Regulations and Important Warnings
! Please read all operating and maintenance (servicing) instructions in the literature accompanying this
equipment. If these instructions are not followed exactly, possible bodily injury may occur.
! The MATRIX FRAME unit is suitable for mounting on wall only.
! To avoid shock, do not perform any non-authorized servicing. Disconnect the product from the power line
before removing covers. Any adjustment and maintenance of the opened device should be done only
while the device is disconnected from its source of power and should only be performed by qualified
personnel.
! For the unit, use only Limited Power Source (marked LPS) certified AC/DC adapter, having rated output
24VDC, min.2.5A
! For Touchscreen, use only Limited Power Source (marked LPS) certified AC/DC adapter, having rated
output 12VDC, min. 3.33A
! Unit is intended for maximum operating ambient 40 degree C”

Matrix FRAME Specifications

General

Brand	Matrix
Model	FRAME
Category	Security System
Language	English