Matrix FRAME User Manual

MATRIX FRAME - Installation Manual Page 1
29/10/2017 Ver 1.5
MATRIX FRAME & FRAME TOUCH
(Inc. MiniFrame)
Installation Manual
Copyright © MATRIX-CABINET 2015. All Rights Reserved.
This document contains information of commercial value, proprietary
of MATRIX-CABINET. It is prohibited to copy, use, or transfer this
document and/or any part thereof to anyone without the prior written
permission of MATRIX-CABINET.

Matrix FRAME Specifications

General

Type	Network Video Recorder (NVR)
Operating System	Embedded Linux
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Video Inputs	IP cameras
Network Interface	10/100/1000 Mbps Ethernet
Video Input Channels	32
Video Output Channels	1 (HDMI), 1 (VGA)
Recording Resolution	Up to 8MP
Compression	H.265, H.264

Summary

Safety Regulations and Important Warnings

General Safety and Power Supply Guidelines

Details critical safety precautions, servicing guidelines, and specific power adapter requirements for the unit and touchscreen.

Product Overview and Contents

Product Specifications

Lists physical dimensions, weight, materials, and power supply specifications for the MATRIX FRAME and MiniFrame.

Product Contents

Enlists all components included in the MATRIX FRAME package, such as the main unit, panel PC, and readers.

Frame Unit Installation Steps

Camera Installation Procedures

Network and Internet Connectivity

Internet Cable Connection

Explains how to connect the unit to a network using a TCPIP cable via the rear LAN port.

Manual Override for Power Failure

Touch and Pod Connection