Matrix KranKcycle - Page 9

8
2.3 ASSEMBLY STEPS
CHAPTER 2:
KranKcycle
™
specifications, parts and assembly steps
Attach WATER BOTTLE CAGE to CENTER UPRIGHT FRAME with 4mm ALLEN KEY
WRENCH using item 4-SOCKET HEAD CAP SCREWS.
STEP 7
Attach SEAT to UPRIGHT FRAME by securely placing SEAT HOOKS around
PROTRUDING PIN.
!WARNING! Make sure seat hooks are fully engaged around protruding
center pin.
STEP 8
ASSEMBLY COMPLETE
Krankcycle_091021.indd 8 10/22/09 8:31 AM