Matrix MHC201FR - Page 20

20
If fitting the hob into a 28-40mm worktop:
The four fixing clips supplied should be used. If fitting the hob into a
thin worktop (i.e. 28mm), then we recommend using four 15x15x50mm
wooden batons in addition to the brackets (as per figs. 9 and 10).
Position the fixing brackets perpendicularly to the hob’s edge and
tighten firmly.
1. worktop
2. screw
4. hob
5. seal
1. worktop
2. screw
4. hob
5. seal
6. wooden block
5 4
321
51
15
6
5 4
321
320
560
094
nim
06
nim
05
466
560
416 50
094
nim
06
nim
05
270
50
Fig.9
Fig.10
Fig.11
Fig.12