22
• This appliance is intended to be connected to the mains supply with
a cable of cross sectional area 4mm
.
• The current rating of the fuse or circuit breaker protecting this
appliance should be marked on the socket outlet.
• Assembly and electrical connection should be carried out by
specialised personnel.
• When installing this product we recommend you seek the help of
another individual.
• Should the mains cable be damaged or need to be replaced, it
should only be done so by a qualified electrician or engineer. The
connections to the hob are shown below;
• Ensure that the leads are securely fitted. Failure to do so may
prevent the hob from operating correctly.
Appliance electrical rating: 6500W
L1
N
(PE
)
Fig. 14
To Next Page
Loading...